by engineering | Dec 2, 2020 | IPm General Configuration-Group, Toolkit-Group
Toolkit – Testing GRIDlink locally Configuring 113/135 Series You can test the relay outputs of the GRIDlink using a laptop with the following procedure. STEP 1 – Set Up a laptop with the Toolkit Software STEP 2 – Connect using the RS232 port STEP...
by engineering | Apr 4, 2020 | IPm General Configuration-Group
Serial Converter RJ45 to RS232 General Configuration 113 - 135 Series SERIES 113, 213 & 135 Plug the RJ45 connector from the patch cable into the Serial port on the top of the GRIDlink Caution, do not connect to the Ethernet port by mistake. It is a...
by engineering | Apr 3, 2020 | IPm General Configuration-Group, Toolkit-Group
Serial Cable Assembly Configuring 113/135 Series Most new PCs sold today no longer have the 9 pin serial port. A serial to USB converter found in most Office Supply Stores can convert a USB port for this purpose. Sixnet Toolkit Toolkit – Testing GRIDlink...
by engineering | Apr 3, 2020 | IPm General Configuration-Group, Software Load 113 135 - Group, Toolkit-Group
Toolkit – Installing Latest Version This installs the Toolkit software on your PC Configuring 113/135 Series If you already have Toolkit installed, skip this step. Otherwise begin by, downloading the Toolkit Software from the web. Sixnet/Red Lion Toolkit...
by engineering | Jul 19, 2017 | IPm General Configuration-Group, Toolkit-Group
Serial Connection DB9 to RJ45 Configuring 113/135 Series Fig. 1 Communicating to the GRIDlink via the RS232 serial port is the preferred method if you wish to avoid IP addressing issues normally associated with Ethernet connections. Since the RS232 port B is an RJ45...
by engineering | Apr 25, 2017 | IPm General Configuration-Group, Toolkit-Group
Toolkit – Ethernet Connection Configuring 113/135 Series If you are unable to determine the GRIDlink IP Address then it is recommended to connect by serial cable using the DB9-RJ45 converter provided. See link If you wish to connect by Ethernet and do not know...
