Select Page

Login – E / CE Series via Web Browser

by | Feb 4, 2021 | GRIDlink E CE Installation-Group, GRIDlink Gemini Installation-Group

Web browser configuration can be done from both a USB and an ethernet connection. See below to find out how.
GRIDlink CE & E Series
GRIDlink CE & E Series
When connecting to the CE/E series GRIDlink, you will first need to decide which connection type is best for you. You can connect via USB and Ethernet. Your configuration goal may be to make changes to the ethernet configurations and settings. In this case you may want to connect via USB. If the device is further away or, you do not have a USB handy, you can connect via ethernet.
GRIDlink CE & E Series
When connecting via USB, you will need to open up a web browser. We would suggest using either Google Chrome or Firefox. Once the web browser is open, type 192.168.111.1 into the address bar. If your device is configured for secure connection, you may need to type https://192.168.111.1. Once you connect, if done successfully, you may see the alert screen “your connection is not private”. click, advanced, and Proceed to 192.168.111.1 (unsafe)
The same can be done when connecting via ethernet. The main difference will be the address that you connect to. When connecting via Ethernet, you will need to change your IP address. Change the IP address of your computer to 192.168.0.2 if connecting to eth 1, or 192.168.1.2. You will then need to connect to 192.168.0.1 if connecting to Eth0, and 192.168.1.1 if connecting to Eth1. Once you connect, if done successfully, you may see the alert screen “your connection is not private”. click, advanced, and Proceed.
GRIDlink CE & E Series

When you have connected to the device successfully, you will be prompted to put in a username and password. The username defualt will be admin, and the password will be the last six digits of the serial number.