GRIDlink IPm 113/213 Series Specifications
Quick search by product
Industrial powerPC (32 bit data bus)
- Operating system embedded Linux
- Dynamic memory (RAM) 32 Mbytes – 32bit, 0 wait states
- Program memory (Flash) 32 Mbytes
- Retained memory (RAM) 512K (battery-backed)
- Local I/O (on-board) 26
- Limit placed on expansion 256 per I/O type
- Data logging (OPTIONAL)
- IEC 61131 programming
- High Level C programming, Linux open source
ETHERNET PORT
- 10/100BaseTx (auto-detecting) RJ45 connection (auto-crossover)
- Protocols TCP/IP, ARP, UDP, ICNP, DHCP, Modbus/TCP, SIXNET, and more
SERIAL PORT
- RS485 port A screws (485+, 485-, GND) 2-wire half-duplex
- RS232 Port B RJ45 (TD, RD, CTS, RTS, CD, DTR,DSR, GND)
- Protocols (master & slave) Modbus RTU/ASCII, Optional DNP3 slave
- Flow control hardware, software, RTS-party (for radios and RS485)
DISCRETE INPUTS
- 12 channels (sinking or sourcing) for manual input and force load shed
- Guaranteed ON voltage 9 VDC
- Maximum voltage 30 VDC
- Guaranteed OFF voltage & current 5.0 VDC & 1.5 mA DC
- Input resistance 10K Ohms
- Input current @ 24 VDC 3 mA
- Filtered ON/OFF delay 25 mS (20 Hz max. counting)
- Fast ON/OFF delay 4 mS (100 Hz max. counting)
- Count rate (channels 1 – 8) High Speed Counter (10 KHz on channel 1)
DISCRETE OUTPUTS
- 4 channels (10-30 VDC)
- 1 for Pending Notice
- 2 for Simple Event Load Shed (Moderate, High)
- 1 for Off Line Indication
- Maximum output per channel 1 Amp
- Maximum output per module 4 Amps
- Max. OFF state leakage 0.05 mA
- Minimum load 1 mA
- Inrush current 5 Amps (100 mS surge)
- Typical ON resistance 0.3 Ohms
- Typical ON voltage (@1A) 0.3 VDC
ANALOG
- 8 Input channels (4-20 mA)
- 2 (optional) output channels (4-20mA)
- A/D resolution 16 bits (0.003%)
- Full scale accuracy +/-0.1% (@20°C)
- Span and offset temp. coef. +/-50 ppm per °C
- Input impedance 100 Ohm
- Current protection Self-resetting fuses
- DMRR (differential mode rejection) 66 dB at 50/60 Hz
ENVIRONMENTAL
- Input power 10-30 VDC
- Input current 100 mA @ 24 VDC (typical)
- Operating Temperature -40 to 70°C (-40 to 85°C storage)
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Humidity 5% to 95% RH (non-condensing)
CERTIFICATIONS
- Flammability UL 94V-0 materials
- Electrical safety UL 508, CSA C22.2/14; EN610101; (IEC1010); CE
- EMI emissions FCC part 15, ICES-003, Class A; EN55022; EN61326-1; CE
- EMC immunity EN61326-1 (EN61000-4-2,3,4,6); CE
- Surge withstand IEEE-472 (ANSI C37.90)
- Vibration IEC68-2-6
- Hazardous locations (Class 1, Div 2, Groups A,B,C,D) UL 1604, CSA C22.2/213, Cenelec EN50021 Zone 2
- Tested to Marine/offshore standards