Network Planning

Network Planning

If a cellular router is being used to provide Internet connectivity, you can skip the Network Planning section of this document.

For installations relying on a corporate Local Area Network (LAN) for Internet access, it’s crucial to coordinate with the IT Manager in advance. Ensure that the GRIDlink ADR is permitted to function as a DHCP client on the network. To streamline this process, provide the IT department with a detailed request outlining the requirements. Refer to the "Letter to IT Manager" section in the User Manual for a sample request template.

IP Address (Static vs. DHCP)

GRIDlink VENs are preconfigured with the WAN port set to DHCP by default. If a static IP address is required for the installation, it is recommended to configure this on a known network at your office prior to arriving at the job site.

For detailed guidance, refer to the "Change DHCP to Static IP" section in the User Manual or contact Technical Support for step-by-step assistance.

Static IP Pre-Installation

If you cannot create a network with the same IP addressing system during the pre-installation staging phase, we highly recommend changing the Static IP as the final step before installation in the field after all testing is completed.