Toolkit – Testing GRIDlink locally
You can test the relay outputs of the GRIDlink using a laptop with the following procedure.
STEP 1 – Set Up a laptop with the Toolkit Software
STEP 2 – Connect using the RS232 port
STEP 3
Click the Test I/O icon
- Select D OUT Tab at the bottom
- Turn register USER_TRANSF_IO OFF
- Turn ON the desired relay
Sixnet Toolkit
- Toolkit – Testing GRIDlink locally
- Toolkit – Serial Connection
- Toolkit – Installing Latest Version on your PC
- Show DHCP Status – Toolkit
- Set Ethernet Port to DHCP – Toolkit
- Serial Connection DB9 to RJ45
- Serial Cable Assembly
- Finding MAC Address in Toolkit
- Ethernet Connection – Toolkit
- Configure RS485 Serial Port for Modbus RTU