by engineering | Jul 19, 2017 | IPm General Configuration-Group
Serial Connection DB9 to RJ45 General Configuration Communicating to the GridLink via the RS232 serial port is the preferred method if you wish to avoid IP addressing issues normally associated with Ethernet connections. Since the RS232 port B is an RJ45...
by engineering | Jul 17, 2017 | Open ADR 2.0a-Group
Toolkit – INI Configuration Open ADR 2.0a/b Open the Toolkit project provided by Tech Support. For a new installation see here … Connect to the GRIDlink by Serial Connection or Ethernet Connection. In Operations select File Operations Go to directory...
by engineering | Jun 5, 2017 | IPm Advanced Configuration-Group, Quick Start Guide ADR-steps
Change DHCP to Static IP Toolkit Configuration GRIDlinks are shipped from the factory set for DHCP and should automatically run on any network provided there is a DHCP server. In some cases where another Ethernet device wishes to communicate with the...
by engineering | May 26, 2017 | Datalogging-Group
Setting Up Sixlog SFTP Transfers – 4.0 Client Transfer Datalogging Previous Step : Record Content Select existing Client Transfer, Create New or Delete 2. Select What to Send All Records Since the Last Transfer (preferred) Select this...
by engineering | May 26, 2017 | Datalogging-Group
Setting Up Sixlog SFTP Transfers – 3.0 Record Content Datalogging Previous Step : Capture Parameters Next Step : Client Transfer Select I/O points to be logged. Highlight & click Add. Selected I/O point will appear in Record Definition ...