by Marketing | Nov 21, 2022 | Configuration Initial IPm-Group, Networking-Group, Toolkit-Group
Set Ethernet Port to DHCP – Toolkit The standard Ethernet configuration from the factory is DHCP. Configuring 113/135 Series Configure station module > ports > network 1/Eth0 > Use DHCP Configuration (Initial) for 113/135 Series Configure RS485...
by Marketing | Oct 19, 2022 | Networking-Group
Set a Static IP Address on a Windows PC If you are connecting to an Ethernet device which has a static IP address then you must configure your PC NIC (Network Interface Card) to operate on the same network IP in order to attain a peer to peer connection. Networking...
by engineering | Jan 1, 2021 | Networking-Group, Quick Start Guide ADR
Letter to IT Manager Quick Start Guide Quick Start Guide for ADR * Quick Start Guide (113/135 ADR) Series* Quick Start Guide (E Series-ADR)* Quick Start Guide (Gemini-ADR)Letter to IT ManagerManual Relay Testing h Letter to IT Manager - pdf Download i Letter to IT...
by Marketing | Aug 25, 2017 | Networking-Group, Trouble Shooting Networks-Group
Show Network Adapter Settings Networking When your device will not connect using DHCP and IT is not available to help, here is an easy way to determine what network you are connecting to. Remove the Ethernet CAT5E/6 cable from the GRIDlink and plug into the Ethernet...
by Marketing | Aug 25, 2017 | Networking-Group, Trouble Shooting Networks-Group
Ping a Device Networking Remove the Ethernet CAT5E/6 cable from the GRIDlink and plug into the Ethernet port on your laptop. Click the Start button and type cmd in the search box. Double click on the cmd program and open the Command Prompt. In this...
by Marketing | Jul 27, 2017 | Networking-Group
Communications Communications Modbus Modbus RTU Transfer of Analog OutModbus for ADR 2.0b – E & CE SeriesModbus for ADR 2.0b – 113 & 135 SeriesModbus for ADR 1.0 & 2.0aModbus Design ConsiderationsModbus ASCII I/O TransferConfiguring...
