by Marketing | Dec 8, 2023 | Crimson Software-Group
Crimson 3.2 – Connect to PC Crimson 3.2 – FlexEdge® controllers, Graphite HMIs and Edge Controllers, DA10D, DA30D, CR3000 & CR1000 HMIs.Crimson 3.1 – CR3000 & CR1000 HMIs, Graphite® HMIs and Controllers, and E3 I/O™ modules.Crimson 3.0...
by Marketing | Nov 23, 2023 | Crimson Software-Group
Create BACnet TCP Data Source Data Source is the originating source of information to be converted into a protocol acceptable by a second device. Example a GRIDlink ADR providing Event data to a BMS starting as Serial Modbus RTU and ending as BACnet TCP to the BMS....
by Marketing | Nov 23, 2023 | Crimson Software-Group
Create Modbus RTU Serial Data Source Data Source is the originating source of information to be converted into a protocol acceptable by a second device. Example a GRIDlink ADR providing Event data to a BMS starting as Serial Modbus RTU and ending as BACnet TCP to the...
by Marketing | Nov 16, 2023 | Crimson Software-Group
Crimson 3.0 to 3.2 Conversion Convert a legacy 3.0 Crimson database to 3.2 + Protocol Converters From Crimson 3.2 File > Open… Lower right select the legacy Crimson database ie. [Crimson 3.0 Databases (*.cd3)] Select the database Open Select Target Model ie....
by Marketing | Feb 15, 2023 | Crimson Software-Group
Modbus to BACnet Protocol Conversion Data Tags are used to make the protocol conversion from Modbus to BACnetBACnet slave registers are pre-configured in the Crimson project.The user can modify the BACnet configuration to suite their needs + Protocol Converters BACnet...
by Marketing | Feb 12, 2023 | Crimson Software-Group
Data Tags – GRIDlink ADR Data Tags are used as registers to hold data retrieved from Modbus Devices and are used for screen display and protocol conversion. GRIDlink tags are pre-configured in the Crimson project. Read/Write or Read Only privileges are set in...
