Changing the GRIDview sxClient via Telnet is a relatively simple procedure. This procedure is for GRIDlinks which have been pointed to a different server and now wish to switch.

Connect via Ethernet

If the GRIDlink IP Address is Static then peer to peer connection will work otherwise the connection should be made over the LAN.

Telnet port 23


Tech Support will supply the password

Once in using vi editor, edit this file.

vi /nvram/sxcd/sxclient.ini

  Enter  (to enter edit mode)

Change the baseurl line to baseurl=

Esc key (to enter command mode)

:w  Enter  (to Save file)

Esc key (to enter command mode)

:q    Enter  (to quit vi)

 This completes the editor

To reboot

shutdown -r now