by Marketing | Sep 13, 2022 | Open ADR 2.0b-Group
Remote Commands – 2.0b Open ADR In order to enable Remote Commands, the “commands_enabled” configuration must be set to “1” in the (dras_client.ini) file. OpenADR 2.0b Remote Commands – 2.0bSimple Event SignalsSpecial Event...
by Marketing | Jul 16, 2021 | Open ADR 2.0b-Group
Usage Reports – Telemetry Open ADR The items specified for reporting in the configuration will be offered to the VTN if the VTN registers the report. Both report types may have one or many variables. Each variable has its own sampling characteristics. GRIDlink...
by Marketing | May 14, 2021 | Open ADR 2.0a-Group, Open ADR 2.0b-Group
Simple Event Signals Simple Signals are parsed from the Event payload and receive a numeric representation as seen the the following chart. The Event status represents if an Event is Pending, how far off and if it has become Active. The Operation Mode represents the...
by engineering | Jul 17, 2020 | Open ADR 2.0a-Group, Open ADR 2.0b-Group, Software Load 113 135 - Group
Load INI Configuration – Toolkit Loading the OpenADR ini configuration via Toolkit Open ADR Open the Toolkit project provided by Tech Support. For a new installation see here … Connect to the GRIDlink by Serial Connection or Ethernet Connection. In...
by engineering | Jan 8, 2017 | FAQ 113-135 Series-Group, Open ADR 2.0b-Group
Special Event Signals Open ADR GRIDlink ADR has 4 Digital Outputs which have been traditionally mapped to SIMPLE Events:DO1 – PENDINGDO2 – MODERATEDO3 – HIGHDO4 – VTN readDO5*DO6*DO7*DO8** Additional Digital Outputs available on VT-MIPM-135-ADR...
