by Marketing | Mar 27, 2023 | GRIDlink E CE Configuration, GRIDlink E2 Configuration, Modbus Communications-Group, Power Meters Acuvim-group, Power Meters DENT-Group, Power Meters EMON-Group, Power Meters Shark-Group
Modbus TCP I/O Transfers of Meter Data – E Series E Series configuration to obtain Modbus meter data via Ethernet. îĽ Communications Floating Point Modbus Registers User Defined Tags Automation > Tags Click on image to enlarge Modbus Registers 501-600 are...
by Marketing | Nov 5, 2017 | Power Meters DENT-Group
MB Station No. Using Address Switches – DENT PS3 Meters Decimal values are used for the Modbus Station Number address. The hex value is the corresponding value set on the upper and lower rotary network address switches on the PowerScout. Upper rotary network...
by Marketing | Nov 5, 2017 | Power Meters DENT-Group
Modbus Addresses – DENT PS3 PowerScout 3 RS485 Meters ...
by Marketing | Nov 5, 2017 | Power Meters DENT-Group
Configure Using Modbus – DENT PS3 Changing Baud Rate or Communication Mode by writing to Modbus registers Meters There are only a few registers available in Modbus for configuration. It is recommended to first create a I/O transfer which reads the...
by Marketing | Nov 5, 2017 | Power Meters DENT-Group
Configure Using Address Switches – DENT PS3 Meters...
