by Marketing | May 9, 2023 | Configuration Tools IPm-Group, Toolkit-Group
Serial Cable Assembly for Sixnet IPm Cable assembly for RS232 communications with all Sixnet / Red Lion IPm Series RTUs. Configuring 113/135 Series Install USB Driver Installing USB Driver Click here... A driver from Red Lion must be installed on your PC in order...
by Marketing | Dec 17, 2022 | Configuration Initial IPm-Group, Toolkit-Group
Assign Resources – Toolkit The number of registers assigned should be greater than the number used in the project. Configuring 113/135 Series Assign Resources … Configure station module > Advanced Cycle Time – All products Cycle time (ms) 5000...
by Marketing | Nov 21, 2022 | Configuration Initial IPm-Group, Networking-Group, Toolkit-Group
Set Ethernet Port to DHCP – Toolkit The standard Ethernet configuration from the factory is DHCP. Configuring 113/135 Series Configure station module > ports > network 1/Eth0 > Use DHCP Configuration (Initial) for 113/135 Series Configure RS485...
by Marketing | Nov 21, 2022 | Configuration Initial IPm-Group, Toolkit-Group
Configure RS485 Serial Port for Modbus RTU The standard configuration for the RS485 port is to allow other Modbus serial devices to obtain data over Modbus Configuring 113/135 Series Configuration (Initial) for 113/135 Series Configure RS485 Serial Port for Modbus...
by engineering | Dec 2, 2020 | Configuration Tools IPm-Group, Toolkit-Group
Toolkit – Testing GRIDlink locally Configuring 113/135 Series You can test the relay outputs of the GRIDlink using a laptop with the following procedure. STEP 1 – Set Up a laptop with the Toolkit Software STEP 2 – Connect using the RS232 port STEP...
by engineering | Apr 3, 2020 | Configuration Tools IPm-Group, Toolkit-Group
Serial Cable Assembly Cable assembly for RS232 communications with all Sixnet / Red Lion IPm Series RTUs. Configuring 113/135 Series Install USB Driver Installing USB Driver Click here... A driver from Red Lion must be installed on your PC in order for the cable...