by engineering | Apr 25, 2017 | Configuration Initial IPm-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Ethernet Connection – Toolkit Connecting to a GRIDlink over an Ethernet network with a DHCP server, you must first determine the IP Address given. Configuring 113/135 Series Network Physical Connection GRIDlink should be placed on a network with a DHCP Server...
by engineering | Apr 9, 2017 | Trouble Shooting Networks-Group, VTN GRIDview disconnect-Group
Check Internet Connection A laptop will aid in determining of the Internet is accessable. Trouble Shooting Open ADR Using a Laptop To check that there is an Internet connection, your laptop should have the same IP address setup as the GRIDlink (DHCP or static). If...
by engineering | Apr 8, 2017 | Trouble Shooting Open ADR 2.0a-Group, Trouble Shooting Open ADR 2.0b-Group, VTN GRIDview disconnect-Group
No Connection to VTN or GRIDview This guide applies to new installations or recovery after long-term inactivity. Trouble Shooting The GRIDview Cloud connection provides a robust back-end connection which authenticates differently than the Open ADR server. As a...
by engineering | Apr 4, 2017 | Configuration Tools IPm-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Serial Connection – Toolkit Skip this step if connecting by Ethernet cable otherwise you must have the proper USB to DB9 serial cable assembly. See links. Configuring 113/135 Series Serial Cable Serial Cable Assembly Click here ... Installing USB Driver...
