by Marketing | Jul 27, 2017 | Communications-Group, Modbus Communications-Group
Modbus Design Considerations Communications Modbus Devices can access the OpenADR signal values either through Modbus TCP over Ethernet (All Series) or RTU RS485 9600 8N1 (Series 113/135 only) The default station number is 5. If it is necessary to change then...
by Marketing | Jul 27, 2017 | Modbus Communications-Group
Modbus for ADR 1.0 & 2.0a Communications Modbus TCP GRIDlink will respond to READ requests from a Modbus Master over Ethernet. Note GRIDlink is shipped for DHCP. The IP Address when leased can be found on GRIDview. It is important that the Modbus Master...
by Marketing | Jul 27, 2017 | Networking-Group
Communications Communications Modbus Modbus for ADR 2.0b – E & CE SeriesModbus for ADR 2.0b – 113 & 135 SeriesModbus for ADR 1.0 & 2.0aModbus Design ConsiderationsModbus ASCII I/O Transfer Wiring (Communications)...
by Marketing | Jul 26, 2017 | FAQ 113-135 Series-Group, FAQ Open ADR2.0a-Group, FAQ Open ADR2.0b-Group
How can I see the XML payload GRIDlink receives? GRIDlink ADR 1. In GRIDview Select View 2. Status 3. Copy the curl_trace_get.log Paste into an XML formatter to view the Event...
by Marketing | Jul 26, 2017 | FAQ 113-135 Series-Group, FAQ Open ADR2.0a-Group, FAQ Open ADR2.0b-Group
How do I change Market Context? Frequently Asked Questions In GRIDview open “Device/Files” Click on the “Edit” button to open the ini file. At the bottom of the file is the “Market Context” fields. (This application requires a blank...
