by Marketing | Feb 15, 2023 | HMI Configuration-Group
Protocol Converter Modbus to BACnet Data Tags are used to make the protocol conversion from Modbus to BACnet BACnet slave registers are pre-configured in the Crimson project. The user can modify theBACnet to suite their needs GRIDview HMI - Protocol Converters BACnet...
by Marketing | Feb 12, 2023 | HMI Configuration-Group
HMI – Protocol Converter Data Tags Data Tags are used as registers to hold data retrieved from Modbus Devices and are used for screen display and protocol conversion. GRIDlink tags are pre-configured in the Crimson project. Read/Write or Read Only privileges are...
by Marketing | Feb 11, 2023 | HMI Configuration-Group
GRIDlink Modbus RTU Connection This procedure establishes the communications method the HMI will retrieve data from the GRIDlink. Serial RS485, RS232 or Ethernet TCP IP GRIDview HMI - Protocol Converters Prior to this procedure you should (refer to Crimson –...
by Marketing | Feb 10, 2023 | HMI Configuration-Group
Crimson 3.0 – Connect to PC Crimson 3.0 for G304 & G307 HMI Protocol Converters This procedure will show how to connect to the HMI to change network settings to operate on your Local Area Network. GRIDview HMI - Protocol Converters Download Crimson Software...
