by engineering | Apr 3, 2020 | Configuration Tools IPm-Group, Procedure Change to Static IP 113/135-Group, Software Load 113 135 - Group, Toolkit-Group
Toolkit – Installing Latest Version This installs the Toolkit software on your PC. This should be completed in advance of modifying GRIDlink setting as it takes some time to download and install. Configuring 113/135 Series Download Toolkit Software If you...
by engineering | Jul 19, 2017 | Configuration Tools IPm-Group, Toolkit-Group
Serial Connection DB9 to RJ45 Configuring 113/135 Series Fig. 1 Communicating to the GRIDlink via the RS232 serial port is the preferred method if you wish to avoid IP addressing issues normally associated with Ethernet connections. Since the RS232 port B is an RJ45...
by engineering | Apr 25, 2017 | Configuration Initial IPm-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Ethernet Connection – Toolkit Connecting to a GRIDlink over an Ethernet network with a DHCP server, you must first determine the IP Address given. Configuring 113/135 Series Network Physical Connection GRIDlink should be placed on a network with a DHCP Server...
by engineering | Apr 4, 2017 | Configuration Tools IPm-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Serial Connection – Toolkit Skip this step if connecting by Ethernet cable otherwise you must have the proper USB to DB9 serial cable assembly. See links. Configuring 113/135 Series Serial Cable Serial Cable Assembly Click here ... Installing USB Driver...
by engineering | Feb 26, 2017 | Configuration Initial IPm-Group, Configuration Tools IPm-Group, Toolkit-Group
Show DHCP Status – Toolkit The standard configuration is DHCP. This enables the user to determine what IP address was assigned to the unit. Configuring 113/135 Series 1. Open a Toolkit project and connect to the IPm via Serial Connection 2. Operations /...
by engineering | Feb 5, 2017 | Configuration Advanced IPm-Group, Networking-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Change DHCP to Static IP – Toolkit GRIDlinks are shipped from the factory set for DHCP and should automatically run on any network provided there is a DHCP server. These are the final steps to change to Static IP. DNS Considerations. When the GRIDlink is changed...