by engineering | Feb 28, 2016 | Uncategorized
Operating system embedded Linux Dynamic memory (RAM) 32 Mbytes – 32bit, 0 wait states Program memory (Flash) 32 Mbytes Retained memory (RAM) 512K (battery-backed) Local I/O (on-board) 26 Limit placed on expansion 256 per I/O type Data logging (OPTIONAL) IEC...
by engineering | Aug 31, 2015 | FAQ 113-135 Series-Group
oadrResponseRequired GRIDlink ADR “ResponseRequired” is sent by the VTN and must always be followed by the VEN. This is part of the specification and is therefore automatic and not configurable in...
by engineering | Aug 11, 2015 | FAQ 113-135 Series-Group
Send a Test Signal to GRIDlink through GRIDview GRIDlink ADR To send a test signal to the GRIDlink, you should first check to make sure that the “Transfer All” option is disabled. If the page looks like this, then “Transfer All” is enabled. When “Transfer All” is on...
by engineering | Aug 5, 2015 | Trouble Shooting 113 135 Series-Group
DO 4 cycling On-Off The Digital Output 4 is a visual indicator that GRIDlink is not only connecting to the Demand Response Server but is also parsing payloads properly. If there was a configuration or software problem DO4 would not be on at all. There are a number of...
by engineering | Jul 5, 2015 | Networking-Group, Toolkit-Group, Trouble Shooting Networks-Group
Finding MAC Address in Toolkit Configuring 113/135 Series Advanced Operations In Toolkit highlight GRIDlink Operations > Advanced Operations > Read Firmware Version At the bottom, a complete dump of the GRIDlink’s important status information will be...
