by Marketing | Nov 21, 2022 | Configuration Advanced IPm-Group, GRIDlink 113-135 Configuration, Software Load 113 135 - Group, Trouble Shooting GRIDview-Group
Load sxClient / GRIDview – Toolkit Installing the GRIDview sxClient is a two-step process, as it requires two separate files: OpenSSL – This must be installed first, especially if GRIDview has not been previously installed. sxClient (GRIDview) – Install this...
by Marketing | Nov 21, 2022 | Configuration Initial IPm-Group, Networking-Group, Toolkit-Group
Set Ethernet Port to DHCP – Toolkit The standard Ethernet configuration from the factory is DHCP. Configuring 113/135 Series Configure station module > ports > network 1/Eth0 > Use DHCP Configuration (Initial) for 113/135 Series Configure RS485...
by Marketing | Nov 21, 2022 | Configuration Initial IPm-Group, Toolkit-Group
Configure RS485 Serial Port for Modbus RTU The standard configuration for the RS485 port is to allow other Modbus serial devices to obtain data over Modbus Configuring 113/135 Series Configuration (Initial) for 113/135 Series Configure RS485 Serial Port for Modbus...
by Marketing | Oct 20, 2022 | Landing Page, Trouble Shooting Open ADR 2.0a-Group, Trouble Shooting Open ADR 2.0b-Group
GRIDview – VTN Disconnect Trouble Shooting Trouble Shooting Open ADR GRIDview - VTN Disconnect Trouble Shooting Check Internet ConnectionCommunication Error Codes with the VTNcURL Error 60 – peer certificate cannot be authenticatedcURL Errors 2.0a/bIntermittent Off...
by Marketing | Oct 19, 2022 | Trouble Shooting Open ADR 2.0b-Group, Uncategorized, VTN GRIDview disconnect-Group
cURL Error 60 – peer certificate cannot be authenticated PROBLEM: A new VTN won’t connect or disconnects after a OpenADR package upgrade. This will require Admin privileges in GRIDview to resolve. Trouble Shooting Open ADR GRIDview View / Status: Open the status...
