by Marketing | Aug 4, 2017 | FAQ 113-135 Series-Group, FAQ Open ADR2.0b-Group
INI Configuration Parameters 2.0b This shows all valid configuration settings for GRIDlink to communicate to the VTN (Virtual Top Node) wtfdivi014-url3 Open ADR GRIDview Load a Pre-configured text file to connect to VTN Device / Files /nvram/gridlink/dras_client.ini...
by Marketing | Jul 27, 2017 | Communications-Group, Modbus Communications-Group
Modbus Design Considerations Communications Modbus Devices can access the OpenADR signal values either through Modbus TCP over Ethernet (All Series) or RTU RS485 9600 8N1 (Series 113/135 only) The default station number is 5. If it is necessary to change then...
by Marketing | Jul 27, 2017 | Modbus Communications-Group
Modbus Registers 1.0 & 2.0a 113/135 Communications Modbus TCP GRIDlink will respond to READ requests from a Modbus Master over Ethernet. Note GRIDlink is shipped for DHCP. The IP Address when leased can be found on GRIDview. It is important that the Modbus...
by Marketing | Jul 27, 2017 | Networking-Group, Services-Group
Communications Communications Table of Contents Modbus Modbus Modbus RTU Transfer of Analog OutModbus Registers 2.0b – E2 SeriesModbus Registers 2.0b – 113/135 SeriesModbus Registers 1.0 & 2.0a 113/135Modbus for ADR 2.0b – E & CE...
by Marketing | Jul 26, 2017 | FAQ 113-135 Series-Group, FAQ Open ADR2.0a-Group, FAQ Open ADR2.0b-Group
How can I see the XML payload GRIDlink receives? GRIDlink ADR 1. In GRIDview Select View 2. Status 3. Copy the curl_trace_get.log Paste into an XML formatter to view the Event...
