by Marketing | Feb 15, 2023 | Crimson Software-Group
Modbus to BACnet Protocol Conversion Data Tags are used to make the protocol conversion from Modbus to BACnetBACnet slave registers are pre-configured in the Crimson project.The user can modify the BACnet configuration to suite their needs + Protocol Converters BACnet...
by Marketing | Feb 12, 2023 | Crimson Software-Group
Data Tags – GRIDlink ADR Data Tags are used as registers to hold data retrieved from Modbus Devices and are used for screen display and protocol conversion. GRIDlink tags are pre-configured in the Crimson project. Read/Write or Read Only privileges are set in...
by Marketing | Feb 11, 2023 | Crimson Software-Group
Modbus RTU Connection to GRIDlink This procedure establishes the communications method the HMI will retrieve data from the GRIDlink. Serial RS485, RS232 or Ethernet TCP IP + Protocol Converters Prior to this procedure you should (refer to Crimson – Getting...
by Marketing | Feb 10, 2023 | Crimson Software-Group
Crimson 3.0 – Connect to PC Crimson 3.0 for G304 & G307 HMI Protocol Converters This procedure will show how to connect to the HMI to change network settings to operate on your Local Area Network. + Protocol Converters Download Crimson Software Download...
