by Marketing | Jul 27, 2017 | Communications-Group, Modbus Communications-Group
Modbus Design Considerations Communications Modbus Devices can access the OpenADR signal values either through Modbus TCP over Ethernet (All Series) or RTU RS485 9600 8N1 (Series 113/135 only) The default station number is 5. If it is necessary to change then...
by Marketing | Jul 27, 2017 | Modbus Communications-Group
Modbus Registers 1.0 & 2.0a 113/135 Communications Modbus TCP GRIDlink will respond to READ requests from a Modbus Master over Ethernet. Note GRIDlink is shipped for DHCP. The IP Address when leased can be found on GRIDview. It is important that the Modbus...
by engineering | Feb 25, 2017 | Modbus Communications-Group
Modbus Registers 2.0b – 113/135 Series All OpenADR registers are available to Read via Modbus TCP (Ethernet) or RTU (serial) for use in a Building Management System or any Control Device capable of initiating a Modbus signal. The control can be as simple as...
