by Marketing | Oct 19, 2022 | Networking-Group
Set a Static IP Address on a Windows PC If you are connecting to an Ethernet device which has a static IP address then you must configure your PC NIC (Network Interface Card) to operate on the same network IP in order to attain a peer to peer connection. Networking...
by Marketing | Sep 27, 2022 | FAQ HMI-Group
What does -BB?? mean? When the HMI is displaying unknown values when transferring data from one unit to another, it is often a formatting issue. Frequently Asked Questions Problem A “+B??” is a sign that there are not enough available numbers before the...
by Marketing | Sep 13, 2022 | Open ADR 2.0b-Group
Remote Commands – 2.0b Open ADR In order to enable Remote Commands, the “commands_enabled” configuration must be set to “1” in the (dras_client.ini) file. OpenADR 2.0b Remote Commands – 2.0bSimple Event SignalsSpecial Event...
by Marketing | Jul 4, 2022 | Trouble Shooting Dynamic ADR, Trouble Shooting E-CE Series
Relay Deadband Relay Settings for 113/135 Series for Standard & Dynamic ADR Trouble Shooting Relay Off Delay When the output control is PID (Proportional) with a set point relays are set to trip when the measured variable exceeds the Upper Set Point Limit. The...
by Marketing | Feb 4, 2022 | Configuration Advanced IPm-Group, Software Load 113 135 - Group
GRIDlink Recovery 113-135 Series This procedure is for units in the field needing recovery due to long term inactivity. Loading Software If the device is Offline with GRIDview, the sxclient must be installed locally using the Toolkit configurator. Procedure 1...