by engineering | Apr 8, 2017 | Trouble Shooting Open ADR 2.0a-Group, Trouble Shooting Open ADR 2.0b-Group, VTN GRIDview disconnect-Group
No Connection to VTN or GRIDview This guide applies to new installations or recovery after long-term inactivity. Trouble Shooting The GRIDview Cloud connection provides a robust back-end connection which authenticates differently than the Open ADR server. As a...
by engineering | Apr 4, 2017 | Configuration Tools IPm-Group, Procedure Change to Static IP 113/135-Group, Toolkit-Group
Serial Connection – Toolkit Skip this step if connecting by Ethernet cable otherwise you must have the proper USB to DB9 serial cable assembly. See links. Configuring 113/135 Series Serial Cable Serial Cable Assembly Click here ... Installing USB Driver...
by engineering | Feb 26, 2017 | Configuration Initial IPm-Group, Configuration Tools IPm-Group, Toolkit-Group
Show DHCP Status – Toolkit The standard configuration is DHCP. This enables the user to determine what IP address was assigned to the unit. Configuring 113/135 Series 1. Open a Toolkit project and connect to the IPm via Serial Connection 2. Operations /...
by engineering | Feb 26, 2017 | FAQ General-Group
Is there any pairing relationship between the module and the base? wtfdivi014-url0 Frequently Asked Questions There is generally no issue swapping modules and bases but here are some important things to know: The serial number is hard coded into a processor on...
by engineering | Feb 25, 2017 | Modbus Communications-Group
Modbus Registers 2.0b – 113/135 Series All OpenADR registers are available to Read via Modbus TCP (Ethernet) or RTU (serial) for use in a Building Management System or any Control Device capable of initiating a Modbus signal. The control can be as simple as...